Fronius Robacta Reamer Alu 3000upm, Operating Instructions Manual

Page: 55 / 92

Installing the electrically-controlled wire cutter
on the Robacta Reamer Alu Edition and Robacta
Reamer Alu 3000upm (optional)
Installing the
electrically-con-
trolled wire cut-
ter
NOTE!
Installation of the wire cutter is shown for the Robacta Reamer Alu Edition.
The wire cutter is installed in exactly the same way on the Robacta Reamer Alu
3000upm.
(1) (2)
1
2
1
2
1
Position the mounting bracket (1)
on the wire cutter (2) as shown and
screw into place as described - us-
ing the fixings supplied
(3)
(4)
(3)
(3)
2
Undo 3 screws and washers (3)
3
Remove cleaning device housing
cover (4)
55
EN