Fronius Robacta Reamer Alu 3000upm, Operating Instructions Manual

Page: 46 / 92

Adjusting the Robacta Reamer Alu Edition lifting
device
Adjusting the
lifting device
(1) (1)
(2) (2)
1
Remove protective covering (1)
2
Ensure that the lifting device is in
its lowest position
3
Loosen screw (2) on the lifting
device
4
Move the welding torch to the
cleaning position
(4) (4) (4)
(2) (2) (2)
(5) (5) (5)
(3) (3) (3)
(6) (6) (6)
1/3 1/3 1/3
2/3 2/3 2/3
5
Push the lifting device (3) by hand into its highest position and hold in place
6
Manually push cleaning motor (4) and cleaning brush to the cleaning posi-
tion
-
see diagram (5) - correct adjustment
-
see diagram (6) - incorrect adjustment
7
Fix cleaning motor (4) in this position in the lifting device (3) - tighten screw
(2) on the lifting device
8
Carry out function test - push lifting device by hand to its highest position
-
Check that lifting device is adjusted correctly - see diagram (5). If the
correct adjustment is not given, readjust the lifting device
9
Fit the protective covering to the cleaning device in its original position
46