Fronius Robacta Reamer Alu 3000upm, Operating Instructions Manual

Page: 45 / 92

Fitting the cleaning cutter on the Robacta Ream-
er Twin
Fitting the
cleaning cutter
CAUTION!
Danger due to cleaning cutter that has become very hot through use.
This can result in severe burns.
▶
Before handling cleaning cutters, allow cleaning cutter to cool to room tem-
perature (+25 °C, +77 °F).
CAUTION!
Danger from incompatible wearing parts.
This can result in damage to property and malfunctions.
▶
Only use the device manufacturer's contact tips, gas nozzles and cleaning
cutters. No liability is accepted for damage caused by the use of contact tips,
gas nozzles or cleaning cutters from third-party manufacturers.
The cleaning cutter is not part of the scope of suppl.. Consult the manufacturer's
spare parts list for the appropriate cleaning cutter:
https://spareparts.froni-
us.com/
1
Remove the protective covering from the cleaning device
2
3
Fit the protective covering to the cleaning device in its original position
45
EN