Fronius Robacta Reamer Alu 3000upm, Operating Instructions Manual

Page: 71 / 92

On the Robacta Reamer Twin:
3
Briefly press the valve lever on the cleaning device wire cutter to the side by
more than 15° using a tool
- If the cleaning device wire cutter does not respond to the movement of the
valve lever, the cleaning device (including the wire cutter) is depressurised
- If the wire cutter responds to the movement of the valve lever, the cleaning
device (and therefore also the wire cutter) is still connected to a compressed
air supply.
If this is the case, you must disconnect the cleaning device from the com-
pressed air supply and check again that the cleaning device is depressurised
before starting work
71
EN