Fronius Robacta Reamer Alu 3000upm, Operating Instructions Manual

Page: 27 / 92

Robacta Reamer Twin control elements, connec-
tions and mechanical components
Control ele-
ments, connec-
tions and mech-
anical compon-
ents
(5)
(8)
(7)
(6)
(1)
(2)
(4)
(3)
(1) Parting agent adjuster
for setting the spray amount on the parting agent spray nozzles
(2) Compressed air connection
for a dry compressed air supply at 6 bar (86.99 psi)
Thread identification compressed air connection: G ¼“
(3) Harting Han6P connection socket (X1)
for a + 24 V DC supply
CAUTION!
Risk of damage to Harting Han6P connection (X1) supply due to overcurrent.
Secure supply against overcurrent with a 500 mA slow-blow fuse.
(4) "Cleaning" button
for manually checking the following functions:
- Cleaning motor ON/OFF
- Compressed air and parting agent supply to parting agent spray
nozzles (compressed air/parting agent mixture is sprayed out of the
parting agent spray nozzles)
- Lifting device UP/DOWN
- Gas nozzle clamping device extending/retracting
(5) Gas nozzle clamping device
holds the gas nozzle in place during cleaning
(6) Protective covering
(7) Cleaning motor
drives the cleaning cutter
(8) Lifting device
lifts the cleaning motor and the cleaning cutter to the cleaning position
ready to commence cleaning
27
EN