Fronius Primo 208-240, Service Manual & Spare Parts List

Page: 123 / 164

123
EN-US
Fix the switch shaft with the retaining
clip (1)
Final Tasks Connect the DC and AC cables to the terminal block
Tightening torque = 1.5 to 1.8 Nm
Tighten earthing terminals that are surplus or not needed to the DC disconnector (TX
20) also with a torque of 1.6 Nm.
Insert the device into the wall bracket and tighten screws
If applicable connect the data communication lines
Attach the DATCOM cover
Reconnect the AC power supply
Set the DC disconnector to ON
(1)
4
3
1
2
3
4
5
6