Fronius Fronius IG Plus 100, Operating Instructions Manual

Page: 99 / 157

91
Menu Options
in the Setup
Menu
(continued)
IG no.
Sets the number (= address) of the Fronius IG Plus in a system with
several solar inverters
Unit
-
Setting range 01 - 99 (100. Fronius IG Plus = 00)
Factory setting 01
Important! Each Fronius IG Plus must be assigned its own address when
connecting several inverters in a data communications system.
DAT
COM
Controls a data connection, activates the signal card, resets the Personal
Display Card and Interface Card
Unit
-
Setting range Displays OK
COM
; SIGCD
TEST
/ PDCD
RST
/ IFCD
RST
Factory setting -
TIME
Time and date setting
Unit
DDMMYYYY, HH:MM
Display area Date / Time
Factory setting -
The ‘Time’ menu option is only supported when the optional Datalogger is
connected.
STATE
PS
Status display for power modules, the last error that occurred can be
displayed
Important Due to the low level of insolation early in the morning and in
the evening, the status messages 306 (power low) and 307 (DC low) are
displayed routinely at these times of day. These status messages do not
indicate any kind of fault.
VERSI
ON
Shows the version number and serial number of the IG Brain unit and the
power module.
Unit
-
Setting range MAIN
CTRL
/ LCD / PS (PS00, PS01, PS02)
Factory setting -