Fronius Fronius IG Plus 100, Operating Instructions Manual

Page: 81 / 157

73
Display
(continued)
Item Function
(7) Area for display unit
displays the unit assigned to the display value
(8) Icon for the ‘Enter’ key
(9) Icons for the ‘Menu/Esc’ key
(10) Icons for the ‘Down/Right’ key
(11) Icons for the ‘Left/Up’ key
(12) Area for the display value
shows the display value
(13) Segment bar (not active during setup)
displays the current power feeding into the grid independent of the
selected display mode. Displayed as a percentage of the maximum
power that the photovoltaic inverter is capable of.
Startup Phase Once the Fronius IG Plus switches on automatically it runs a self-test.
After this, the public grid is tested.
This test can take from several seconds up to several minutes depending
on local regulations. The Operating Status LED is yellow during the star-
tup phase.
1. Segment test
All display elements will illuminate for approximately one second
2. Self-test of the Fronius IG Plus’ main components
- The Fronius IG Plus goes through a virtual checklist
- The display will show ‘TEST’ as well as the component currently
being tested (e.g. ‘
LED
’)
Test Procedu-
re
3. Synchronization with the grid
- ‘WAIT
PS
’ is displayed, the inverter icon blinks: Fronius IG Plus is
waiting for all the power modules on the grid to be ready. This
process is dependent on the DC voltage.