Fronius Fronius IG Plus 100, Operating Instructions Manual

Page: 109 / 157

101
Available data connection
‘SIGCD
TEST
’ will be displayed
4. Press the ‘Enter’ key
If there is a data connection,
‘OK
COM
’ will be displayed.
3. Use the ‘Down’ key to initiate
the ‘signal card test’
The ‘signal Card Test’ will start,
‘SIGCD
ON
’ appears on the
display
If the ‘signal card’ is active, it
will emit an acoustic signal in
confirmation.
Important If no acoustic signal
is heard, the signal lines should
be checked.
The set inverter number will
now flash
7. Press the ‘Enter’ key
The number has been applied
8. Press the ‘Esc’ key to exit the
‘IG No.’ menu option
1. Select the ‘DAT
COM
’ menu
option
2. Press the ‘Enter’ key
The rest of the display depends
on whether
-
a data connection has been
established
- a data connection is faulty
or an option has not been
installed
Setting the
‘DAT
COM
’ Menu
Option
Setting the ‘IG
No.’ Menu
Option
(continued)