The spring piles may already be assembled, depending on the delivery configuration.
In this case, the following step is omitted:
direction of rotation
❒
Screw the spring blades to a pile according to their size. The longest spring blade
(A) should be used in such a way that the bend (B) points in the other direction
(=direction of rotation)
❒
Fit the tearing hook (C) to the bend (B) of the longest spring blade
➥
The tip of the tearing hook (C) points in the direction of rotation of the rotary
agitator
CAUTION: Screw connections of the spring blades (D) should have about 1 mm
of play, so they should not be fully tightened.
Depending on the size of the fuel store, the number of parts required as well as
the length of the spring piles varies!
❒
Fit spring blades with clamping plates (A) to the rotary agitator arms
➥
Hook (B) must point in the direction of the clamping plate (A – in the direction of
rotation)
Assembly
4
Assembling the articulated arm rotary agitator
Installation and Operating Instructions GAR 110 / 150 | M2060120_en
25
