❒
Only for screw Ø 110 mm:
Push both feed screws together (A) and fix with
spring pin
❒
Insert the feed screw into the trough on the boiler room side
❒
Grease the square shaft of the mitre gear with copper paste and attach the feed
screw
❒
Align the troughs in a row, and adjust with the adjustable feet if necessary
Fit cover plates to the open trough as follows:
▪ Pellet cover plate (A)
– For pellet version
▪ Wood chips cover plate (B)
– For wood chips version
▪ Raising plate (C)
– When no raised floor is used
❒
Grease the multi-tooth shaft of the mitre gear with copper paste
❒
Place the rotary agitator head on the multi-tooth
➥
Use mounted eye bolts for this purpose
NOTICE! The rear end of the cover plate rests on the cutting edge (D) of the
open trough.
D
4
Assembly
Assembling the articulated arm rotary agitator
22
Fröling Ges.m.b.H. | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com
