5.3 Filling the store with fuel
Note the following when loading the machine with fuel:
❒
Only use permitted fuels!
⇨
See "Permitted fuels" [page 8]
❒
Remove foreign bodies from the store before filling
NOTICE! Systems in which the fuel is delivered by tanker and is blown into the
store space must be fitted with a rotary valve.
CAUTION
Entering the store space when the system is switched on
Risk of injury due to automatic startup of system, particularly the discharge
system!
Therefore, before entering the fuel store:
❒
Switch off the power supply to the entire system
➥
Depending on the model via boiler, expansion switch cabinet, etc.
For blowing in fuel the following precautions also apply:
CAUTION
Blowing in fuel when the boiler is switched on:
The underpressure generated from blowing in fuel can lead to smoke being
sucked back into the store if the boiler is switched on. Possible excess
pressure could cause smoke to escape into the installation room, possibly
resulting in injury and damage!
Therefore, before blowing in the fuel:
❒
Switch off the power supply to the entire system
➥
Depending on the model via boiler, expansion switch cabinet, etc.
❒
Allow the system to cool for
at least two hours
Operating the system
5
Filling the store with fuel
Installation and Operating Instructions GAR 110 / 150 | M2060120_en
35
