❒
Push the flange bearing (A) onto the screw end and secure to top part of gravity
shaft
❒
Push the space ring (B) onto the screw end
❒
Insert key (C) into nut on screw end
❒
Secure torque support with pin (D) to top part of gravity shaft
➥
Centre distance of pin and screw end: 150 mm
❒
Secure torque support with bearing (A) to the geared motor as illustrated
❒
Lubricate shaft stub incl. key with copper paste
❒
Push the geared motor (B) onto the screw end
❒
Secure locking washer (C) with hexagonal screw and washer
If the geared motor cannot be installed as shown above for reasons of space, it is
possible to turn the drive unit:
❒
Turn the torque support with bearing 180° and secure to geared motor
❒
Turn the geared motor and torque support 180° and fit to the screw end and
torque support as explained above
Assembly
4
Assembling the articulated arm rotary agitator
Installation and Operating Instructions GAR 110 / 150 | M2060120_en
29
