manualshive.com logo in svg

Fresenius Medical Care 5008, Operating Instructions Manual

Share
Download
Fresenius Medical Care 5008 Operating Instructions Manual Download Page 252

Chapter 11:  System Description

11-42

Fresenius Medical Care 5008 OP 5/09.06

11.7 Initial Start-Up

11.7.1 Relevant Instructions Before Initial Start-Up

When bringing the dialysis system from a cooler to a warmer room, 
allow approx. 2 hours for the system to adjust to the ambient 
temperature before turning the unit on.

11.7.2 Electrical Installation

Connection to the power 
supply system

The national standards and regulations (e.g. in Germany VDE 0100-
107) must be observed when connecting the machine to the power 
supply system.

Protective earth

When using safety class I devices, the quality of the protective 
conductor of the installation is of particular importance. It must be taken 
into consideration that in many countries regulations have been 
enacted by the national authorities.

Potential equalization

Connect the potential equalization to the rear of the machine if this is 
required by the legal regulations at the place of installation (e.g. 
according to VDE 0100-107 in rooms of application group 2).

If additional equipment, which is not included in the accessories, is 
connected to the dialysis system, there is a danger that the permissible 
leakage currents will be exceeded.

Caution

 

The system may only be used in accordance with the accompanying 
documents.
Only then will the manufacturer consider himself liable for any effects on 
safety, reliability and performance of the system.

The initial start-up must be performed by the Technical Service of 
Fresenius Medical Care or a person authorized by them!

In case of a first installation of the dialysis system, observe the 
Specifications.

Caution

 

If the hemodialysis system is taken out of service after the initial start-
up, the following instructions have to be observed. When the machine 
is returned to use, check that the pressure of the water supply meets the 
prescribed minimum pressure.

Summary of Contents for 5008









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands