manualshive.com logo in svg

Fresenius Medical Care 5008, Operating Instructions Manual

Share
Download
Fresenius Medical Care 5008 Operating Instructions Manual Download Page 130

Chapter 6:  Treatment

6-18

Fresenius Medical Care 5008 OP 5/09.06

Message: 

Blood detected - Dialysis

 Start

The blood pump stops. The arterial/venous occlusion clamp closes.

Mute

 LED is flashing.

Touch the 

Start

 button.

The system automatically changes to the TREATMENT SCREEN.
Heparin pump and ultrafiltration are started automatically, if preset in 
the Operator Setup. Set the blood flow to the desired delivery rate. The 
alarm limits will be set automatically.

Standard Connect

Connect the arterial line to the patient.
If infusion of the rinse solution contained in the line is desired, now 
connect the venous line.

Touch the 

Standard 

Connect

 

button.

Message: 

Start the blood pump – 

Confirm

Touch the 

Confirm

 button.

The blood pump is delivering.
Set the delivery rate of the blood pump to the desired value.

Optical detector sensed blood.

Message: 

Blood detected - Double-Needle dialysis 

Start

 – Single-

Needle dialysis 

Start

The blood pump stops. The arterial/venous occlusion clamp closes.

Mute

 LED is flashing.

Connect the venous connector of the tubing system to the patient 
(provided this has not been done yet).

Touch the

 Double-Needle dialysis 

Start

 

button.

Caution

 

When using high-flux dialyzers and selecting low UF rates there is a 
possibility of local backfiltration.
Backfiltration depends on:
– the type of high-flux dialyzer
– the different flow resistances on the dialysate and the blood side
– the viscosity of the blood

Note

 

If the level in the SN chamber rises too high during the treatment it has 
to be reduced (see chapter 6.4.3 , page 6-19)

Caution

 

When using high-flux dialyzers and selecting low UF rates there is a 
possibility of local backfiltration.
Backfiltration depends on:
– the type of high-flux dialyzer
– the different flow resistances on the dialysate and the blood side
– the viscosity of the blood

Summary of Contents for 5008









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands