manualshive.com logo in svg

Fresenius Medical Care 5008, Operating Instructions Manual

Share
Download
Fresenius Medical Care 5008 Operating Instructions Manual Download Page 208

Chapter 10:  Other Functions

10-32

Fresenius Medical Care 5008 OP 5/09.06

10.12 Single-Needle Click-Clack

O

To be observed before using the Single-Needle Click-Clack option

This procedure should be used in exceptional cases only, since the 
stroke volumes and, thus, the corresponding recirculation shares can 
be very unfavorable. For displaying the effective blood flow, a 
recirculation volume of 2 ml per Single-Needle Click-Clack cycle 
(standard DN dialysis cannula) will be considered. The actual 
recirculation, however, may differ, depending on the dialysis cannula 
used.
The arterial and the venous blood line are connected with a Y-piece to 
the vascular access.

If a Single-Needle blood line has been inserted, it is not possible to 
select Single-Needle Click-Clack.

Single-Needle Click-Clack may be selected only after the minimum 
rinse volume has been reached in Preparation mode.

During a Double-Needle treatment, Single-Needle Click-Clack may be 
started or aborted at any time.

When reinfusion is started, Single-Needle Click-Clack will be switched 
off.

An ONLINE-HDF(HF) treatment currently in progress will be aborted, 
and treatment will be continued with HD. An ONLINE bolus can be 
administered at any time. Reinfusion may be performed using the 
ONLINE option.

O

Starting Single-Needle Click-Clack

In the 

SINGLE-NEEDLE

 menu

If you wish to alter Single-Needle Click-Clack parameters:
Set the desired parameters. Touch the 

OK

 button to confirm the values 

entered.
Visually check the confirmed values.

Touch the 

Click-Clack I/O

 button.

Message: 

Connect both the arterial and the venous patient line to the 

same vascular access. – Single-Needle 

Start

 – 

Abort

Connect both the arterial and the venous patient line to the same 
vascular access.

Touch the 

Start

 button.

Touch the 

TREATMENT

 menu button to return to the TREATMENT 

SCREEN.

O

Aborting Single-Needle Click-Clack

In the 

SINGLE-NEEDLE

 menu

Touch the 

Click-Clack I/O

 button.

Summary of Contents for 5008









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands