manualshive.com logo in svg

Fresenius Medical Care 5008, Operating Instructions Manual

Share
Download
Fresenius Medical Care 5008 Operating Instructions Manual Download Page 106

Chapter 5:  Preparation

5-56

Fresenius Medical Care 5008 OP 5/09.06

The system automatically switches to the PREPARATION SCREEN.

Message: 

Connect dialyzer couplings!

5.4.6

Connecting the Dialysate Lines

Message: 

Connect dialyzer couplings!

Open the shunt door.

Connect the dialysate supply line (dialyzer coupling red) to the dialyzer 
(on the side of the venous blood outlet port).

Connect the dialysate return line (dialyzer coupling blue) to the dialyzer 
(on the side of the arterial blood inlet port).

Close the shunt door.

5.4.7

Priming the Extracorporeal Blood Circuit with Rinse Solution Bag

O

Starting the Rinse procedure

PREPARATION SCREEN

Check/set the rinse volume.
Check/set the delivery rate of the blood pump.

The rinse volume and the delivery rate are automatically set to the value 
preselected in the Operator Setup. Change the rinse volume and the 
delivery rate if necessary.

Touch the 

Blood pump I/O

 button. (

Blood pump I/O

 indicator green.)

O

Interrupting the Rinse procedure

PREPARATION SCREEN

Touch the 

Blood pump I/O

 button. (

Blood pump I/O

 indicator grey.)

Message: 

Do not connect patient! Minimum rinse volume not reached. 

– Rinse 

Continue

 

Do not connect a patient if rinsing is interrupted during the T1 test or 
during a cleaning program.

Note

 

The dialysate lines may only be connected after the T1 test has been 
completely terminated.

If not yet done, the parameters for dialysate, UF and the 
heparin pump now may be checked/set.

Summary of Contents for 5008









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands