manualshive.com logo in svg

Freescale Semiconductor i.MX 6DualLite, Reference Manual

Share
Download
Freescale Semiconductor i.MX 6DualLite Reference Manual Download Page 62

To get to these options, use the command ./ltib -c when located in the <ltib dir>. On the
displayed screen, select Configure the kernel and exit. When the next screen appears,
select the options to configure.

• CONFIG_MXC_IPU: includes support for the Image Processing Unit. In menu

configuration, this option is available under:

Device Drivers > MXC support drivers > Image Processing Unit Driver

By default, this option is Y for all architectures.

If ARCH_MX37 or ARCH_MX5 is true, CONFIG_MXC_IPU_V3 will be set.
Otherwise, CONFIG_MXC_IPU_V1 will be set.

• CONFIG_MXC_CAMERA_OV5640_MIPI: option for both the OV 5640 mipi

sensor driver and the use case driver. This option is dependent on the MXC_IPU
option. In menu configuration, this option is available under:

Device Drivers > Multimedia devices > Video capture adapters > MXC Video For
Linux Camera > MXC Camera/V4L2 PRP Features support > OV 5640 Camera
support using mipi

Only one sensor should be installed at a time.

• CONFIG_MXC_CAMERA_OV5642: option for both the OV5642 sensor driver and

the use case driver. This option is dependent on the MXC_IPU option. In menu
configuration, this option is available under:

Device Drivers > Multimedia devices > Video capture adapters > MXC Video For
Linux Camera > MXC Camera/V4L2 PRP Features support > OmniVision ov5642
camera support

Only one sensor should be installed at a time.

• CONFIG_MXC_CAMERA_OV5642: option for both the OV5642 sensor driver and

the use case driver. This option is dependent on the MXC_IPU option. In menu
configuration, this option is available under:

Device Drivers > Multimedia devices > Video capture adapters > MXC Video For
Linux Camera > MXC Camera/V4L2 PRP Features support > OmniVision ov3640
camera support

Only one sensor should be installed at a time.

• CONFIG_MXC_IPU_PRP_VF_SDC: option for the IPU (here the > symbols

illustrates data flow direction between HW blocks):

CSI > IC > MEM MEM > IC (PRP VF) > MEM

Source Code Structure

i.MX 6Solo/6DualLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013

62

Freescale Semiconductor, Inc.

Summary of Contents for i.MX 6DualLite










































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands