manualshive.com logo in svg

Freescale Semiconductor i.MX 6DualLite, Reference Manual

Share
Download
Freescale Semiconductor i.MX 6DualLite Reference Manual Download Page 300

42.1.5 Source Code Structure

Table below lists the source files and headers available in the following directories:

<ltib_dir>/rpm/BUILD/linux/arch/arm/plat-mxc/pwm.c

<ltib_dir>/rpm/BUILD/linux/include/linux/pwm.h

Table 42-2. PWM Driver Files

File

Description

pwm.h

Functions declaration

pwm.c

Functions definition

42.1.6 Menu Configuration Options

To get to the PWM driver, use the command ./ltib -c when located in the <ltib dir>. On
the screen displayed, select Configure the kernel and exit. When the next screen appears
select the following option to enable the PWM driver:

• System Type > Enable PWM driver
• Select the following option to enable the Backlight driver:

Device Drivers > Graphics support > Backlight & LCD device support > Generic
PWM based Backlight Driver

Introduction

i.MX 6Solo/6DualLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013

300

Freescale Semiconductor, Inc.

Summary of Contents for i.MX 6DualLite










































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands