Table 41-1. UART Mapping
Baud Rate (kbps)
Max SBC bit rate (kbps)
115.2
75
230.4
150
460.8
300
600.0
400
921.6
410
The following table describes the UART configuration files.
41.2.2 Reset and Power control
Currently we use an external bluetooth debug board for the bluetooth communication,
The bt module needs an usb cable connected with it to get the power supply, also in the
debug board there is a reset button used to reset the whole bt module.
41.2.3 Configuration
To get to the Bluetooth configuration, use the command ./ltib -c when located in the <ltib
dir>. In the screen, select Configure Kernel, exit, and a new screen will appear.
The Linux kernel configuration option CONFIG_MXC_BLUETOOTH is provided for
the MXC processors. In the menuconfig this option is available under Device Drivers −>
MXC support drivers -> MXC Bluetooth support -> MXC Bluetooth support. By default,
this option is M for all architectures.
Chapter 41 Bluetooth Driver
i.MX 6Solo/6DualLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013
Freescale Semiconductor, Inc.
295
