manualshive.com logo in svg

Freescale Semiconductor i.MX 6DualLite, Reference Manual

Share
Download
Freescale Semiconductor i.MX 6DualLite Reference Manual Download Page 281

Command: PTP_SET_RTC_TIME

Description: command sets the RTC time register with provided PTP time through the
ptp_rtc_time structure.

Command: PTP_SET_COMPENSATION

Description: command sets the drift compensation with provided compensation value
through the ptp_set_comp structure.

Command: PTP_GET_CURRENT_TIME

Description: command provides the current RTC time and returns the timestamp through
the ptp_rtc_time structure.

Command: PTP_FLUSH_TIMESTAMP

Description: command flushes the transmit and receive timestamp queues.

Command: PTP_GET_ORIG_COMP

Description: command provides the original frequency compensation, minimum
frequency compensation, maximum frequency compensation, minimum drift and
maximum drift of RTC through the ptp_get_comp structure.

Chapter 38 ENET IEEE-1588 Driver

i.MX 6Solo/6DualLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013

Freescale Semiconductor, Inc.

281

Summary of Contents for i.MX 6DualLite










































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands