manualshive.com logo in svg

Freescale Semiconductor i.MX 6DualLite, Reference Manual

Share
Download
Freescale Semiconductor i.MX 6DualLite Reference Manual Download Page 140

16.1.2 Software Operation

The camera driver implements the V4L2 capture interface and applications and uses the
V4L2 capture interface to operate the camera.

The supported operations of V4L2 capture are:

• Capture stream mode

The supported picture formats are:

• YUV422P
• UYVY
• YUV420

The supported picture sizes are:

• QVGA
• VGA
• 720P
• 1080P

16.1.3 Source Code Structure

Table below shows the camera driver source files available in the directory.

         <ltib_dir>/rpm/BUILD/linux/drivers/media/video/mxc/capture.

Table 16-1. Camera Driver Files

File

Description

ov5640_mipi.c

Camera driver implementation for ov5640 using MIPI CSI-2 interface

16.1.4 Linux Menu Configuration Options

The following Linux kernel configuration option is provided for this module.

To get to this option, use the ./ltib -c command when located in the <ltib dir>. On the
displayed screen, select Configure the Kernel and exit. When the next screen appears,
select the following option to enable this module:

• Device Drivers > Multimedia devices > Video capture adapters > MXC Video For

Linux Camera > MXC Camera/V4L2 PRP Features support > OmniVision ov5640
camera support using mipi.

OV5640 Using MIPI CSI-2 interface

i.MX 6Solo/6DualLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013

140

Freescale Semiconductor, Inc.

Summary of Contents for i.MX 6DualLite










































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands