manualshive.com logo in svg

Freescale Semiconductor i.MX 6DualLite, Reference Manual

Share
Download
Freescale Semiconductor i.MX 6DualLite Reference Manual Download Page 175

24.3.1 Source Code Structure

<ltib_dir>/rpm/BUILD/linux/drivers/rtc

Table below shows the RTC module files.

Table 24-1. RTC Driver Files

File

Description

rtc-snvs.c

SNVS RTC driver implementation file

The source file for the SRTC specifies the SRTC function implementations.

24.3.2 Menu Configuration Options

To get to the SRTC driver, use the command ./ltib -c when located in the <ltib dir>. On
the displayed screen, select Configure the kernel and exit. When the next screen
appears, select the following options to enable the SRTC driver:

• Device Drivers > Real Time Clock > Freescale SNVS Real Time Clock

Chapter 24 SNVS Real Time Clock (SRTC) Driver

i.MX 6Solo/6DualLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013

Freescale Semiconductor, Inc.

175

Summary of Contents for i.MX 6DualLite










































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands