manualshive.com logo in svg

Freescale Semiconductor i.MX 6DualLite, Reference Manual

Share
Download
Freescale Semiconductor i.MX 6DualLite Reference Manual Download Page 211

28.1.4 Source Code Structure

The SPI NOR MTD driver is implemented in the following directory:

<ltib_dir>/rpm/BUILD/linux/drivers/mtd/devices/

Table below shows the driver files:

Table 28-1. SPI NOR MTD Driver Files

File

Description

m25p80.c

Source file

28.1.5 Menu Configuration Options

To get to the SPI NOR MTD driver, use the command ./ltib -c when located in the <ltib
dir>. On the screen displayed, select Configure the kernel and exit. When the next screen
appears select the following options to enable the SPI NOR MTD driver accordingly:

• CONFIG_MTD_M25P80: This config enables access to most modern SPI flash

chips, used for program and data storage.

• Device Drivers > Memory Technology Device (MTD) support >Self-contained MTD

device drivers > Support most SPI Flash chips (AT26DF, M25P, W25X, ...)

Chapter 28 SPI NOR Flash Memory Technology Device (MTD) Driver

i.MX 6Solo/6DualLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013

Freescale Semiconductor, Inc.

211

Summary of Contents for i.MX 6DualLite










































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands