FP InovoLabs FP S-Compact BB, Installation And Safety

Page: 17 / 60

Installing the FP S-Compact
17
Step 2: Selecting installation location and mounting the unit
The FP S-Compact is designed for wall mounting or mounting
on a top-hat rail.
Selecting installa-
tion location

Choose a location that offers sufficient space for installation
and connection of the device.
Details on housing dimensions and weight can be found in
the ‘Technical data’ section.

Make sure that the electrical system meets the requirements
mentioned in the ‘For your safety’ section.
FP S-Compact BB

Select a location with good reception quality for an
FP S-Compact with a mobile modem.
Key to a good reception quality is the location of the antenna.
To find a suitable location with good reception, the operating
software can be used to display the reception quality. You can
also test the reception quality with a smartphone.
Notes on signal strength
– For reliable data connections (for remote parametrisation,
Internet dial-up) the signal strength should be at least
-85 to -73 dBm.
– In the range from -87 to -103 dBm, SMS still works in most
cases, but the connections often break down.
No operation is possible below -103 dBm.
Danger to life from explosion!
Sparks can cause explosion and fire!

Do not use the device in a potentially explosive environment
or in the vicinity of flammable gases, vapours, dust or con-
ductive dusts.
Possible damage to the device by external influences!

Only use the device in enclosed and clean spaces.

Protect the device from heat and direct sunlight.

Do not expose the device to strong shocks or vibrations.