FP InovoLabs FP S-Compact BB, Installation And Safety

Page: 52 / 60

FP S-Compact BB / LAN
52
CPU 492 MHz, ARM Cortex-A5, ATMEL SAMA5D27
RAM 128 MB DDR2-RAM
FLASH Memory 128 MB on-board
Interfaces
COM1 (RS232) 5-pole screw connection, max 921 600 bps,
not galvanically isolated
ITU-T V.24, V.28, hardware handshake
Signals: RTS, CTS, GND, RxD, TxD
Maximum transmission distance: 12 m (39 ft)
COM2 (RS485) 3-pole screw connection, DTE in accordance with EIA/TIA-485,
max 1 Mbit/s, not galvanically isolated
No internal termination
Maximum transmission distance: 1 200 m
(4 000 ft),
Depending on the transmission rate, bus and cable type
M-Bus
(via pre-installed
expansion module
S1-MB10)
M-Bus master for up to 10 M-Bus loads
Short-circuit proof, not galvanically isolated
M-Bus voltage: 36 V
Maximum bus length: 50 m (164 ft)
3 screw terminals (grid dimension 5.08 mm / 0.2"),
Cross-section max. 2.5 mm
2
(AWG 14)
Conformity: DIN EN 13757-2, DIN EN 13757-3
Data rate: 300 Baud – 19 200 Baud
Data formats: 8 data bits, 1 start bit, 1 stop bit and
1 parity bit (even parity)
USB USB 2.0 Host interface (e.g. for WiFi stick)
Ethernet / LAN 10/100 Base-T IEEE 802.3, RJ45 connector (8P8C with 1 LED),
shielded
Auto negotiation, Auto MDI-X (crossover cable not required)
Galvanic isolation: 1 500 V (V
rms
min.)