FP S-Compact BB / LAN
38
Make sure that the Access Point is active:
The ‘WiFi’ LED flashes briefly every second.
Switching to
WPS mode
Press the ‘WiFi/Unmount’ button for about 1 second.
Hold down the ‘WiFi/Unmount’ button and then press the
‘Service’ button at the same time.
The ‘WiFi’ LED flashes rapidly. WPS mode is active.
You can now use your end device (laptop, smartphone) to
establish a connection with the FP S-Compact. Many end
devices detect the WPS mode automatically (e.g. Windows 10)
and can connect directly to the device.
WPS mode is active for about 2 minutes. The FP S-Compact
then switches back to the normal ‘Access point’ mode.
WPS mode can be reactivated at any time.
Close the housing
Once you have finished working in WPS mode:
Fasten the housing cover to the housing with the four
fastening screws. Tighten the fastening screws with a torque
of 0.7 Nm to 1 Nm (0.52 ft lb to 0.73 ft lb).
WiFi stick (plugged
into the USB port)
‘WiFi / Unmount’ button
‘WiFi’ LED
‘Service’ button
Summary of Contents for FP S-Compact BB
