FP InovoLabs FP S-Compact BB, Installation And Safety

Page: 9 / 60

For your safety
9
2.6 How to avoid damage to property
Observe the following instructions to avoid damage to the device, the peripherals and
potential consequential damage:

Only use the device in enclosed and clean spaces.

Avoid harmful environmental conditions such as heat, sunlight, strong shocks and
vibrations.

Please note the special instructions for handling the SIM card.

Protect the interfaces from electrical damage by avoiding mixing up connections.

Use a torque screwdriver to avoid mechanical damage to the connections.

Ensure that the supply voltage and earthing is connected correctly (L, N, earth,
compliance with the characteristic values, sufficient conductor cross-section).

Only carry out a software update if no peripherals are connected.

Ensure the correct termination of the end devices. Incorrect or missing termination
can lead to communication problems.
2.7 Explanation of the symbols on the serial number plate and
in the device
General safety sign.
Read the related documents for more information. Observe the
notes on safe handling in accordance with these instructions.
Warning of electrical voltage.
Disconnect the device from the power supply before opening.
Only electricians are permitted to open the device.
The terminal point for connecting the power supply is marked
with this symbol.
This symbol is embossed on the protective cover for the mains
supply.