FP InovoLabs FP S-Compact BB, Installation And Safety

Page: 6 / 60

FP S-Compact BB / LAN
6
2 For your safety
Please read these safety instructions carefully before planning to use an FP S-Compact BB
or an FP S-Compact LAN, installing and starting up a device or performing mainte-
nance work and tests.
Make sure that you have understood all instructions.
2.1 Intended use
The IIoT Gateways FP S-Compact BB and FP S-Compact LAN are devices for collecting,
processing and transmitting energy data, e.g. in boiler rooms.

Use the FP S-Compact BB / FP S-Compact LAN only for applications that comply
with the device specification. Observe the specified characteristics.

When project planning, installing, starting up, maintaining and testing the device,
observe the safety and accident prevention regulations applicable for the specific
application and location.

Operate the device only as described in the product documentation for the
FP S-Compact BB / LAN.

Do not carry out any unauthorised interventions in the hardware and software.
2.2 Basic instructions for safe use
The device complies with the applicable safety provisions for operation in a controlled
environment. Please observe the following tips for your own safety.
Danger! Do not use in a potentially explosive environment
Sparks can cause explosion and fire.

Do not use the device in a potentially explosive environment or in the vicinity of
flammable gases, vapours, dust or conductive dusts.
Avoiding danger from electrical voltage

Only use copper conductors for the power supply that meet the specifications in
the Technical data.

Operate the device only with a properly installed electrical system that has an easily
accessible, all-pole (L,N) disconnect device equipped with a minimum contact
spacing of 3 mm (0.12").

Make sure that the device is connected to the mains-side protective conductor.

Disconnect the device from the power supply immediately in the event of danger.