Foundry FastIron SuperX Hardware Installation Manual Download Page 162

Page: 162 / 198

FastIron Hardware Installation Guide for the FSX, FSX 800, and FSX 1600

8 - 14

December 2008

Power Supply Specifications

This section contains the following information for the power supplies that ship with the FastIron X Series chassis
devices.

•

“Physical Dimensions and Weight” on page 8-14

•

“Environmental Considerations” on page 8-15

•

“Electrical Specifications” on page 8-16

•

“Input Connector and Plug” on page 8-17

•

“Regulatory Compliance” on page 8-18

•

“Safety Warnings” on page 8-19

For an overview of the power supplies, see “Power Supplies” on page 2-27.

Physical Dimensions and Weight

Table 8.10 lists the physical dimensions and weight of the power supplies.

Table 8.10: Physical Dimensions and Weight of Power Supplies

Dimensions

Weight

Replacement power supplies SX-ACPWR-SYS and SX-ACPWR-POE

(manufacturing

part numbers 32014-

xxx

and 32016-

xxx

, respectively)

1. Manufacturing part numbers are inscribed on the power supply (top) label.

1.65 in (H) x 4.00 in (W) x 15 in (D)

4.19 cm (H) x 10.17 cm (W) x 38.10 cm (D)

6 lbs (2.7 kg)

All other power supplies

1.63 in (H) x 4.00 in (W) x 14.25 in (D)

4.13 cm (H) x 10.17 cm (W) x 36.19 cm (D)

6 lbs (2.7 kg)

Summary of Contents for FastIron SuperX







































































































































































































Search results

Summary of Contents for FastIron SuperX

Reviews:

Related manuals for FastIron SuperX

Brands by name

Popular brands

Foundry FastIron SuperX, Hardware Installation Manual

Search results

Summary of Contents for FastIron SuperX

Reviews:

Related manuals for FastIron SuperX

Brands by name

Popular brands