FastIron Hardware Installation Guide for the FSX, FSX 800, and FSX 1600
3 - 18
© 2008 Foundry Networks, Inc.
December 2008
If a problem persists after taking action described in this table, contact Foundry’s technical support.
POE (if
applicable)
On – Green
The port is enabled, a
power-consuming
device has been
detected, and the
module is supplying
power to the device.
Off
The port is not providing in-line
power.
AC and DC Power Supplies
AC OK (AC
supply only)
ON – Green
(steady)
The power supply is
receiving AC power
from an AC power
source
OFF
The power supply is not receiving
power from an AC power source.
You can do the following:
•
Make sure that the power
supply cord is connected
securely to the wall outlet and
the power supply.
•
Make sure that the wall outlet
is rated for 115/120V and
20A. If it is not, obtain a cable
that is compatibly rated for the
outlet.
•
Make sure that the wall outlet
has power.
DC IN (DC
supply only)
Green (steady)
The power supply is
receiving DC power
from a DC power
source
OFF
The power supply is not receiving
power from a DC power source.
You can do the following:
•
Make sure that the power
supply cables are connected
securely to the power source
and the power supply.
•
Make sure that the DC power
source is 48VDC @ 30 A.
•
Make sure that the power
source has power.
DC OUT
ON – Green
(steady)
The power supply is
supplying DC output
power to the chassis
OFF
The power supply is not supplying
DC output power to the chassis.
If this occurs and the AC OK (AC
power supply) or DC IN (DC power
supply) LED is Green, then there
is a problem with the power supply
and it must be replaced.
ALM
OFF
No alarms present and
the power supply is in
normal operating
condition.
Amber
There is an alarm present and the
power supply is malfunctioning.
Verify the AC or DC input and DC
output voltages.
Table 3.3: Desired and Abnormal LED States After System Power On (Continued)
LED
Desired State
Meaning
Abnormal
State
Meaning/Action
