FastIron Hardware Installation Guide for the FSX, FSX 800, and FSX 1600
8 - 10
© 2008 Foundry Networks, Inc.
December 2008
Pinouts and Signalling
This section lists the pinouts for the DB-9 connector and RJ-45 port jacks.
Serial (Console) Port Pinouts
The Console port is a standard male DB-9 connector, as shown in Figure 8.4.
Figure 8.4
Serial port pin and signalling details
Most PC serial ports require a cable with a female DB-9 connector. However, terminal connections will vary,
requiring a cable with either a DB-9 or DB-25 connector, male or female.
IPv4 2-port 10-GbE management module with no
optics
40
°
C
269,436
IPv4 2-port 10-GbE management module with
one optic
40
°
C
254,100
IPv4 2-port 10-GbE management module with
two optics
40
°
C
240,416
IPv4 management module with no ports
40
°
C
534,522
Interface Modules
24-port Fiber with no optics
40
°
C
348,204
24-port Fiber with 24 optics
40
°
C
110,328
24-port Gigabit Ethernet copper without POE
40
°
C
325,103
24-port Gigabit Ethernet copper with POE
40
°
C
308,283
2-port 10-Gigabit Ethernet with no optics
40
°
C
464,938
2-port 10-Gigabit Ethernet with one XFP
40
°
C
421,084
2-port 10-Gigabit Ethernet with two XFPs
40
°
C
384,789
Table 8.8: MTBF for the FastIron X Series Chassis and Modules (Continued)
Configuration / Module
Temperature
MTBF (hours)
1
5
9
6
Pin Assignment
DB-9 male
Pin Number
1
2
3
4
5
6
7
8
9
Switch Signal
Reserved
TXD (output)
RXD (input)
GND
CTS (input)
RTS (output)
Reserved
Reserved
Reserved
