FastIron Hardware Installation Guide for the FSX, FSX 800, and FSX 1600
6 - 12
© 2008 Foundry Networks, Inc.
December 2008
You can also observe the Pwr LED on each module. If this LED is on (green), the module is receiving power. If this
LED is off, the module is not receiving power. (A module without power will not function as the active or standby
module.)
Software
You can use the
show module
CLI command to display the status of the management modules:
The following shows an example output of the
show module
command.
Syntax:
show module
The Status column indicates the module status. The management modules can have one of the following
statuses:
•
ACTIVE – The module is currently the active management module.
•
STANDBY – The module is the standby management module. The status of the standby module can be one
of the following:
•
Init – The module is currently initializing as the standby module.
•
OK – The module is ready to take over as the active module, if necessary.
•
Wait – The module is awaiting boot information from the active management module.
•
Sync – The active module is currently synchronizing files between itself and the standby module.
FastIron SX 800 Router# show module
Module Status Ports
Starting MAC
F1: SX-FISF Switch Fabric active
F2: SX-FISF Switch Fabric active
S1: SX-F424C 24-port Gig Copper OK 24
00e0.5200.0100
S2:
S3:
S4:
S5: SX-F424C 24-port Gig Copper OK 24
00e0.5200.0160
S6:
S7:
S8:
S9: SX-FI2XGMR4 2-port Management Active 2
00e0.5200.0100
{ Status : OK }
S10: SX-FI2XGMR4 2-port Management Standby 2
00e0.5200.0100
{ Status : OK }
