Managing the Chassis and Modules
December 2008
© 2008 Foundry Networks, Inc.
5 - 7
Fan <number>
For the FSX and FSX 800, this field displays formation about fans 1
through 6. Fan locations are as follows:
•
Fan 1 – Left-most fan in bottom row
•
Fan 2 – Middle fan in bottom row
•
Fan 3 – Right-most fan in bottom row
•
Fan 4 – Left-most fan in top row
•
Fan 5 – Middle fan in top row
•
Fan 6 – Right-most fan in top row
For the FSX 1600, this field displays information about fans 1 and 2. Fan
locations are as follows:
•
Fan 1 – This is Fan A and is the right-most fan in the rear of the
chassis.
•
Fan 2 – This is Fan B and is the right-most fan in the rear of the
chassis.
<Fan status>
The status of a fan can be one of the following:
•
OK – The fan is functioning properly and is keeping the temperature
of each module within an acceptable temperature range.
•
Failed – The fan is not functioning properly or the fan control module
cannot control the fan.
Speed <Operating mode>
The operating mode of a fan can be one of the following:
•
Auto (automatic) – This is the default
•
Manual
<Current fan speed>
In release 03.0.00 and later, the fan speed for the FSX and FSX 800 can
be one of the following:
•
1 (low) – The fan is functioning at 25 percent of capacity.
•
2 (medium-low) – The fan is functioning at 37 percent of capacity.
•
3 (medium) – The fan is functioning at 50 percent of capacity.
•
4 (high) – The fan is functioning at 100 percent of capacity.
In releases prior to 03.0.00 and for the FSX 1600 chassis, the fan speed
can be one of the following:
•
1 (low) – The fan is functioning at 20 percent of capacity.
•
2 (medium-low) – The fan is functioning at 40 percent of capacity.
•
3 (medium) – The fan is functioning at 60 percent of capacity.
•
4 (medium-high) – The fan is functioning at 80 percent of capacity.
•
5 (high) – The fan is functioning at 100 percent of capacity.
The current fan speed is shown in double brackets.
Table 5.1: Chassis Status and Temperature Information (Continued)
This Field...
Displays...
