Ford 2001 Ranger, Manual

Page: 1033 / 1218

2001 RANGER ELECTRIC VEHICLE
149-1 COMPONENT TESTING: INTRODUCTION
INTRODUCTION
Component testing procedures are provided to determine whether or not a
component operates properly.
Testing information for each component includes a schematic with compo-
nent terminal locations and step-by-step test procedures. Component termi-
nals are identified by:
1. the circuit number of the wires that connect to that terminal,
2. the wire insulation color, and
3. letters or numbers that may be marked on the component.
38 BK/OG (B)
Circuit number
as shown on
schematics Terminal as
marked on some
components Wire
insulation
color
The component connector MUST BE REMOVED before testing. To test a
single circuit within the component, select that circuit under the column TO
TEST. If you wish to test the complete component, perform all tests.
Connect the tester to the terminals shown in the second column and oper-
ate the component as shown in the third column.