FOR-A HVS-300HS, Operation Manual

Page: 90 / 114

80
18-4. Loading Data from USB Flash Memory
18-4-1. To Load Setting Data
This section explains how to load setting data to the USB memory by using a "data.all" file as
an example.
(1) Insert the USB flash memory into the USB port.
(2) Press the MENU button, then press the 9/FILE button to open the FILE top menu.
(3) Turn F1 to select LOAD, and then press F1 or the PAGE DOWN button to open the
[FILE-LOAD] menu.
FILE :> LOAD >SAVE >UPDATE
TOP : 101MB
(4) Turn F1 to select ALL to the
EXT
(File Extension) item.
(5) Turn F3 to select data. . (See section 18-5 "Moving between Directories in the USB Flash
Memory.") Press F3 to confirm the file selection.
FILE : EXT : LOAD : <DIR> 1/2
LOAD : =
ALL : = :data 101MB
(6) Press F2 to load the setting data to the control panel.
IMPORTANT
Once the saved system data (files with "all" or "sys" extension) is loading, you will have
to restart the switcher. (The unit power off then power ON.) The system data is applied
only after the switcher is restarted.
Be sure to load the system data (files with all or sys extension), because the switcher
and the control panel may not be disconnected if loading the different connection
settings from the previous.
18-4-2. To Download Image Files
When loading a JPEG or TARGA file from the USB flash memory, you can select a centered
or tiled format as well as a normal one. This section explains how to download the
"sample.jpg" file to STILL1 as an example.
(1) Insert the USB flash memory into the USB port.
(2) Press the MENU button, then press the 9/FILE button to open the FILE top menu.
(3) Turn F1 to select LOAD, and then press F1 or the PAGE DOWN button to open the
[FILE-LOAD] menu.
(4) Turn F1 to select JPG to the
EXT
(File Extension) item.
(5) Turn F2 to select STL1 to the
LOAD
item as a destination.
If selecting STL1C to
LOAD
, the image file is saved to STILL1as a centered format.
If selecting STL1T to
LOAD
, the image file is saved to STILL1as a tiled format.
(6) Turn F3 to select sample. . (See section 18-5 "Moving between Directories in the USB
Flash Memory.") Press F3 to confirm the file selection.
FILE : EXT : LOAD : <DIR> 1/2
LOAD : =JPG :=STIL1 :sample 101MB
(7) Press F2 to load the image file to the STILL1 memory.