FOR-A HVS-300HS, Operation Manual

Page: 80 / 114

70
To Change Functional Behavior of the Transition Buttons
(1) Press the CLR/TRANS RATE button in the MENU/DIRECT PATT/EVENT/KEYPAD block to
display the TRANS menu.
(2) Press the PAGE DOWN button to go to PAGE 3 or PAGE 4.
(3) Turn F2 to select a transition effect for the ON-AIR button. Turn F3 to select a transition
effect for the PinP AUTO button.
TRANS : RATE :USER TRANS :ADV CTL: 3/6
PinP 1 : =10 : =SLIDE TOP : =C/AT :
TRANS : RATE :USER TRANS :ADV CTL: 4/6
PinP 2 : =10 : =CUT : =AUTO :
ON-AIR Button
Item Setting Description
CUT Performs Cut-in or CUT-out of PinP.
SCALER Performs Scale Up or Down of PinP.
SLIDE RIGHT/LEFT
SLIDE TOP/BOTTOM
Performs Slide-in or Slide-out of PinP.
WIPE RIGHT/LEFT
TRANS
RATE TYPE
WIPE TOP/BOTTOM
Performs WIPE-in and Wipe-out of PinP.
PinP Auto Button
Item Setting Description
AUTO Always performs Mix transition regardless of the pressing button time.
ADV CTRL
C/AT
Performs Cut transition when briefly pressing the button.
Performs MIX transition when pressing and holding down the button
for more than one second.
The transition duration for the MIX transitions can be set at the
RATE
item in the menu on a
frame basis.