FOR-A HVS-300HS, Operation Manual

Page: 55 / 114

45
11-3. Pattern Modify Example1 (Pattern 20)
This modification example adds a border effect to the KEYER transition using Pattern 20.
(1) Set up KEYER (See section 12. "KEYER and DSK.")
(2) Press KEYER in the NEXT TRANSITION block.
(3) Press WIPE in the TRNSITION TYPE block.
(4) The [TRANS - BKGD] menu appears in the Menu Display. Turn F3 or F4 to select 20 and
press ENT/STORE in the KEYPAD to select Pattern 20.
TRANS : RATE : LIMIT :PATTERN : 1/6
BKGD : =30 : =100.0: =
20 :
(5) Press MENU to the right of the Menu Display (if it is not lit), and then press 4/WIPE in the
KEYPAD to display the WIPE menu.
(6) Turn F1 to select BORDER. Press F1 or the PAGE DOWN button.
WIPE :> BORDER >POS/ANGL>MULTI >SUB EFF
No.020 :>INIT
(7) The [WIPE - BORDER] menu appears. Turn F1 to select the signal used for the border under
the
SIGNAL
item. Select MATT in this example. Set the border width under the
WIDTH
item
and border softness under the
SOFT
item.
WIPE :SIGNAL : WIDTH : SOFT : : 1/2
BORDER : =
MATT : =5.0 : =2.0 : :
(8) Press the PAGE DOWN button to go to PAGE 2. Turn F4 to select a border color from eight
standard colors. Press F4 to apply the selected color. If you want to adjust the selected color
or set the color by entering HSL values, turn F1, F2 and F3 to adjust values or press F1, F2
and F3, enter a value in the Keypad and then press ENT/STORE in the Keypad. Users can
also set these three parameters in the JOYSTICK block. (See section 5-2-4. "Changing
Settings or Values by Using the Joystick.")
WIPE : BORDER COLOR :RECALL : 2/2
BORDER :S=66.3 L=5.4 H=3.5 : >BLUE :