manualshive.com logo in svg

FOR-A HVS-300HS, Operation Manual, Page: 110 / 114

Share
Download
FOR-A HVS-300HS Operation Manual Download Page 110

2

 

E 

EDITOR Connector .................................................................................................................. 6 
Event Memory ........................................................................................................................ 74 
External Dimensions............................................................................................................... 92 

F 

FADE (KEYER and DVE) ....................................................................................................... 61 
Fader Limit ............................................................................................................................. 39 
Features ................................................................................................................................... 1 
File Operations ....................................................................................................................... 78 
Frame Border (Multiviewer) .................................................................................................... 72 
Frame Synchronizer ............................................................................................................... 24 
FREEZE, STROBE, NEGA, MOSAIC (KEYER and DVE)...................................................... 64 

G 

Gamut Clip ............................................................................................................................. 84 
GPI/TALLY OUT Connector ..................................................................................................... 7 

H 

How to Access Menus ............................................................................................................ 12 
How to Assign Sources to Bus buttons................................................................................... 23 
How to enable 2D DVEs (KEYER and DVE) .......................................................................... 59 
How to Give Name to Sources ............................................................................................... 22 
How to Reset WIPE Menu...................................................................................................... 44 
How to Return Settings to Default .......................................................................................... 18 
How to Save Stills................................................................................................................... 66 
How to Select Aux signals ...................................................................................................... 26 
How to Select Patterns ........................................................................................................... 42 
How to Set Values .................................................................................................................. 14 
HVS-300HS (Dimensions)...................................................................................................... 92 
HVS-300HS (Main Unit) ........................................................................................................... 2 
HVS-300HS (Specifications) .................................................................................................. 90 
HVS-30FP and HVS-30RU..................................................................................................... 88 
HVS-30OU (Dimensions) ....................................................................................................... 93 
HVS-30OU (Operation Unit) ..................................................................................................... 3 
HVS-30OU (Specifications) .................................................................................................... 91 
IN/OUT Effects (PinP) ............................................................................................................ 69 

I 

Inserting PinP1 (PinP2) Video ................................................................................................ 67 
Interfaces.................................................................................................................................. 6 
Inverting Keyer and Background ............................................................................................ 57 

K 

Key Edge (KEYER and DVE) ................................................................................................. 62 
Key Masks.............................................................................................................................. 57 
KEY MATT ............................................................................................................................. 56 
KEYER and DSK .................................................................................................................... 52 
KEYER Transitions................................................................................................................. 35 

L 

Loading Data from USB Flash Memory .................................................................................. 80 
Loading Event at Start-up....................................................................................................... 77 
Luminance Key....................................................................................................................... 51 

M 

Mask and Invert ...................................................................................................................... 57 

Summary of Contents for HVS-300HS



















































































































Reviews:

No comments