FOR-A HVS-300HS, Operation Manual

Page: 99 / 114

89
21-2. Setting USER Buttons on HVS-30FP and HVS-30RU
USER Button Default Assignments in HVS-30FP
Button Default setting
FP1 USER1 on HVS-30FP and HVS-30RU AUX XPT SELECT
FP2 USER2 on HVS-30FP and HVS-30RU PinP XPT SELECT
(1) Press the MENU button and then press the 7/SETUP button to display the SETUP menu's
top page.
(2) Turn F1 to select PANEL. Press F1 or the PAGE DOWN button. The [SETUP-PANEL] menu
is displayed.
(3) Turn F1 to select USER BTN. Press F1 or the PAGE DOWN button. The [SETUP - PANEL -
USER BTN] is displayed.
(4) Turn F1 to select a USER button for use.
(5) Turn F2 to select OTHER to
TYPE
and press F2.
PANEL :SELECT : TYPE : FUNC(F3) : 1/1
USER BTN: =FP-1 : =OTHER: =AUX XPT SEL
(6) Turn F3 to select a function to be used and press F3. The setting options are as follows.
Setting Function Button Indication
AUX XPT SELECT Changes the mode to AUX bus signal selection.
KEYER XPT
SELECT
Changes the mode to KEYER/DSK INSERT signal
selection.
PinP XPT SELECT
Changes the mode to PinP1 and PinP2 signal
selection.
Lit when the
mode is active.
21-3. OSD Operation
Pressing both of the control push-buttons on the HVS-30FP or HVS-30RU control panel
simultaneously displays the menu on the preview screen (On Screen Display). Pressing the
both buttons again clears the menu from the screen. The following explains how to display the
desired menu and how to change parameters on the menu in the OSD. See "HVS-30FP and
HVS-30RU operation manual" (soon be released) for details.
To Display a Desired Menu:
(1) Turn either of the control push-buttons to select a menu and press the button to confirm the
selection.
(2) The parameters in the menu are displayed. The name of the selected menu is displayed in
the mini-screen on the HVS-30FP or HVS-30RU panel. If the menu has submenus, go to the
desired submenu in the same way and display parameters. To go back to the main menu,
select RETURN and press the button.
To Change Parameter Setting
(1) Turn either of the control push-buttons to select a parameter and press the button to confirm
the selection.
(2) Turn the button to change the setting and press the button to confirm the change.
(3) To go back to the menu selection, turn the button to select RETURN and press the button. To
exit the menu, press the both buttons.