FOR-A HVS-300HS, Operation Manual

Page: 26 / 114

16
Parameters with the sign ">"
The parameters with the sign ">" in front of them are executable by pushing the relevant
menu control push-button. For example, pressing a menu control push-button initializes
menus (See section 5-3. "How to Return Settings to Default."), stores still images (See
section 14-1. "How to Save Stills."), saves data or loads data (See section 18. "File
Operations"). In the parameters selecting a color from the standard colors pressing the
relevant menu control selects the color. (See section 7-5. "Bus Matte")
5-2-3. Changing Settings or Values by Using the Numeric Keypad
Users can also use the keypad to input numerical settings to a menu. The procedure
example for changing the matte color by using keypad is as follows.
(1) Press the MENU button.
(2) Press the 6/MATT button to display the BUS MATT COLOR menu.
(3) To change the S (Saturation) item, press F1.
(4) Input new setting from the keypad.
(5) Press ENT/STORE to confirm the setting.
(6) To change the L (Luminance) item, press F2, input new setting from the keypad and press
ENT/STORE.
(7) To change the H (Hue) item, press F3, input new setting from the keypad and press
ENT/STORE.
MATT : BUS MATT COLOR :RECALL : 1/1
COLOR :S=50.0 L=80.2 H=125.5: >GREEN:
IMPORTANT
When pressing a push-button, press it down lightly and release it within 1 sec. Note
that if you press and hold a control button for more than 1 sec., related setting will be
returned to their default value and a beep will be heard.
Pressing CLR/TRANS RATE before ENT/STORE cancels the changes just made.
±/EVENT is changes the sign of a value (ex. From “+10” to “-10”).
KEYPAD Mode Display
The KEYPAD right next to the Menu Display has multiple modes: Menu Access, Direct
Pattern, Event Memory, Transition Rate Input and Numeric Input for menu. The mode
buttons on the left-hand side are to switch the KEYPAD modes. The current operation
mode is displayed at upper right-hand side of the menu display. To use the KEYPAD for
menu input, display a desired parameter, press the menu control push-button just below
the parameter (F1-F4), and enter the value using the numeric keypad and then press
ENTER in the KEYPAD.
USB MEMORY
(PUSH to DEF)
4 3
6 5
SIZE
F4 F3 F2 F1
PAGE
USER BUTTON
1 2
POSITION
MENU/DIRECT PATT/EVENT/KEY PAD
ALARM USER BUTTON
HVS-300HS
DIGITAL VIDEO SWITCHER
7/SET UP
4/WIPE
1
8/STILL
5/P in P
2/KEYER
9/FILE
6/MATT
3/DSK
BLACK
TRANS
MENU
DIRECT PATT
±/EVENT
CLR/TRANS RATE 0 /RECALL . (DOT) ENT/STORE