77
10-2. Effects Using Still Store
10-2-1. Motion Blur
Motion blur is an effect that leaves afterimages on a moving object. When the MOTION
BLUR setting in the STILL menu is used, you can easily activate this effect without saving a
motion blur image by simply selecting STILL in the PST bus where the MOTION BLUR
setting was applied and setting to MIX transition. In this example, motion blur will be applied
to STILL4.
Press the STILL(FILE) button with the SHIFT button unlit in the menu select section to
display the STILL menu.
Turn F1 to select SIGNAL line. In the SIGNAL line, turn F2 to select PGM for SIGNAL.
Turn F1 to select MOTION BLUR line. In the MOTION BLUR line, turn F2 to select
STILL4 for SELECT.
Select the bus button of the video input that you want to use for the motion blurs effect in
the PGM bus.
Assign STILL4 to one of the bus buttons (for details about assigning bus buttons, see
section 5-3-3 “Bus Signal Assignment and Inhibit Settings.”) Select the bus button
assigned to STILL4 in the PST bus.
Press the BKGD button in the NEXT TRANSITION section to light up and press the MIX
button in the TRANSITION TYPE section. Use the fader lever or press the AUTO button
to execute the MIX transition.
When the above settings are made, the image displayed on the PGM output screen will
continue to be saved as the STILL4 image. Since this STILL4 image is assigned to the PST
bus, the residual image effect is continued by repeatedly displaying on the PGM output
screen.
IMPORTANT
The motion blur effect can be used on any of STILL1 to STILL4, but it can only be used
on one image at a time. Note that when the MOTION BLUR setting is made for a
STILL, previous image saved for that STILL is lost.