22
4-3-3. User Buttons
The User buttons can be assigned to specific menu pages for use as a menu shortcut.
They
can be also applied to functions such as turning the EDITOR or GPI IN ON / OFF.
There are two methods (as shown below) for assigning menus or functions to USER buttons.
Assigning a menu and function to a USER button
Press the SHIFT button to light on.
Press the STATUS(SETUP) button to open the SETUP top menu.
Turn F1 to select FREE ASSIGN then press F1 to display the SETUP - FREE ASSIGN
menu.
Turn F1 to select the desired USER button for the USER item.
The selected USER
button becomes a lit indication.
To assign a menu page, turn F2 control to select MENU for the TYPE item.
To assign a
function, select FUNC.
Turn F3 to select the menu page or function to be assigned.
If a function is assigned, it
will be lit orange if the corresponding function is ON, and unlit if it is OFF. Each function
assigned USER button can also be a menu shortcut. You can go to the menu directly by
double-clicking the related USER button.
IMPORTANT
When trying to assign a menu page or a function to the lit (already assigned) user
button, the user button goes to flashing orange. Pressing the button again overwrites
the previous entry.
When MENU was selected for the TYPE item
Setting
Menu Page
Menu Line
TRANS/FADER LIMIT
TRANS RATE1
BKGD XPT / MATT
BKGD MATT
WIPE / DVE PATTERN SELECT
TRANS
PATTERN SEL
KEY1 GAIN / CLIP
KEY SOURCE1
KEY1 MATT MASK
MASK TYPE
KEY1 EDGE
EDGE STS
KEY1 SHADOW
SHADOW
KEY1 AUTO CK
AUTO CK
KEY1 MANUAL CK
KEY1
MANU ADJUST
KEY2 GAIN / CLIP
KEY SOURCE1
KEY2 MATT MASK
MASK TYPE
KEY2 EDGE
EDGE STS
KEY2 SHADOW
SHADOW
KEY2 AUTO CK
AUTO CK
KEY2 MANUAL CK
KEY2
MANU ADJUST
DSK GAIN / CLIP
KEY SOURCE1
DSK MATT MASK
DSK
MASK TYPE
STATUS BTN XPT STATUS
STATUS
BUTTON XPT
SEQUENCE SEQUENCE
SEQ
SET
USER PATTERN
USER PATTERN
PAT CTRL
