65
9-1-2. Assigning to PST bus
Follow the procedure below to assign the LINE DVE to PST bus and open the DVE MODIFY
menu specific for PST bus.
Press the DVE button on the PST bus section. The DVE button and the selected bus
signal button turn red.
Press the DVE CH button above the keypad. 4(DVE-PST) button should turn orange. If
the button lights green, press the 4(DVE-PST) button to lit orange.
Press the DVE(FREEZE) button in the menu select section to open the DVE MODIFY
menu specific for PST bus. (See section 9-4 “DVE MODIFY Menu.")
9-1-3. Assigning to KEY1 or KEY2 bus
Follow the procedure below to assign the LINE DVE to KEY1 (or KEY2) bus and open the
DVE MODIFY menu specific for KEY1 (or KEY2) bus.
Press the KEY1 (or KEY2) button in the BUS SELECT section.
Press the DVE button on the PST bus section. The DVE button and the selected bus
signal button turn red.
Press the DVE CH button above the keypad. 1(DVE-KEY1) (or 0(DVE KEY2)) button
should turn orange. If the button lights green, press the 1(DVE-KEY1) (or 0(DVE KEY2))
button to lit orange.
Press the DVE(FREEZE) button in the menu select section to open the DVE MODIFY
menu specific for KEY1 (or KEY2) bus. (See section 9-4 “DVE MODIFY Menu.")
IMPORTANT
When there are no free DVE channels, the LINE DVE function is not available, and the
buttons will not light even if they are pressed. Cancel a BKGD, KEY1, or KEY2 DVE
transition, or another LINE DVE, and then press the button again. (For details on the
number of DVE channels, see section 9-2 "DVE Options.”)
The bus that is set in the DVE MODIFY menu is determined by the lighting colors of
the 7(DVE-PGM), 4(DVE-PST), 1(DVE KEY1), and 0(DVE KEY2) buttons. Pressing
the DVE(FREEZE) button opens the DVE MODIFY menu of the button that is orange.
