99
Color Cancel and Suppression
If there is a discoloration on the foreground subject caused by the spill light from the
background color (normally blue), a blue fringe or tint may appear on the foreground subject.
In this case, use the color cancellation to remove the spilled color as below.
In the KEY1 or KEY2 menu, turn F1 to select the SUPPRESSION line.
In the SUPPRESSION line, turn F5 to set the COL CAN to ON (factory default). When set
to ON, the backing is suppressed to black and the spilled background color on the
foreground is reduced.
If the spilled color is not totally removed using the procedure above. The suppression
level can be also finely adjusted for each color signals (components). With the COLOR
CANCEL to ON, use the F2, F3 and F4 to adjust Y-LV, C1-V, and C2-LV parameters
respectively to help eliminate and correct any color spill that may occur.