112
15-2. Recalling Events
15-2-1. Recalling Events Using Keypad (0-199)
Press the EVENT button on the keypad. The
EVENT button and keypad STORE and RECALL
buttons turn on.
Pressing the RECALL button displays the event
memory menu on the menu screen. A list of the
stored events is displayed in the menu for 100
patterns. To select from another 100 patterns,
press the SHIFT button on the keypad.
Use the 0 to 9 buttons to enter the event that you
want to recall, and then press ENTER to finalize the
selection.
Individual settings can be made for data to be
recalled. Buttons light up to indicate that their
information (See the table below.) will be recalled.
Keypad
Recalled data
Menu button
Recalled data
7
Signal assignment for BKGD
TRANS
BKGD transition settings
4
Signal assignment for KEY1
KEY1
KEY1 transition settings
1
Signal assignment for KEY2
KEY2
KEY2 transition settings
0
Signal assignment for DSK
DSK
DSK transition settings
8
Signal assignment for EFFECT BKGD
-
-
Keypad
Operation
5
Used for overwrite control. To inhibit overwriting, select an event and press to light
up 5.
CLEAR Used to delete stored event data.
Press the RECALL button on the keypad. The stored event is loaded and the operational
settings on the panel are recalled.
IMPORTANT
If the 5 button on the keypad is pressed when recalling events, the selected event can
be set to overwrite disable. Pressing the CLEAR button on the keypad deletes the
selected event.
SEQ
EVENT
DVE CH
DIRECT PATT
7
4
1
0
8
5
2
CLEAR
(CANCEL)
9
6
3
SHIFT
STORE
RECALL
+/-
ENTER
(PLAY)
(PAUSE)