35
DVE KEY
The following signals can be assigned to the DVE KEY button which can be selected as AUX
output. Signals can be assigned at the SETUP – OUTPUT menu.
Press the SHIFT button in the menu select section to turn on the button light, and then press
the STATUS(SETUP) button to display the SETUP menu.
Turn the F1 control to select OUTPUT. Either press the F1 control, or press the DOWN
button to display the SETUP – OUTPUT menu.
Turn the F1 control in the SETUP – OUTPUT menu to select OUT parameter line.
In the OUT line, turn the F3 control to select the DVE KEY output signal. Press F3 to register
the setting.
Selectable Signals for DVE KEY
Setting
Signal
PGM
PGM bus DVE KEY
PST
PST bus DVE KEY
ME_A
A bus DVE KEY output
ME_B
B bus DVE KEY output
KEY1
KEY1 bus DVE KEY
KEY2
KEY2 bus DVE KEY
D KEY1
DVE channel 1 KEY output
D KEY2
DVE channel 2 KEY output
D KEY3 (SD mode only)
DVE channel 3 KEY output
D KEY4 (SD mode only)
DVE channel 4 KEY output
ME_KEY
KEY composite output for three keyers
CLEAN
CLEAN signal can be routed to any AUX output. Either the only background signal or
background with KEY1 and KEY2 signals can be selected for CLEAN output at the SETUP –
OUTPUT menu as in the procedure below.
Press the SHIFT button in the menu select section to turn on the button light, and then press
the STATUS(SETUP) button to display the SETUP menu.
Turn the F1 control to select OUTPUT. Either press the F1 control, or press the DOWN
button to display the SETUP – OUTPUT menu.
Turn the F1 control in the SETUP – OUTPUT menu to select OUT parameter line.
In the OUT line, turn the F2 control to select the CLEAN output signal. Press F2 to register
the setting.
If set to ON:
M/E + KEY1 + KEY2 (DSK not included.)
If set to OFF: M/E output only (default setting)
