34
6-1-1. Selecting Preview Output
The signals output from the PREV output connector at the MU rear panel can be selected
from the four signals BKGD, KEY1, KEY2, or DSK. The video image for BKGD, KEY1, and
KEY2 can be selected in the next transition section for verifying preview output.
DSK display to preview output can be switched on and off by selecting in the menu. ON/OFF
are selected using the DSK parameter block of PREV SEL line in the TRANSITION menu.
(The default setting is OFF.)
6-1-2. Selecting AUX / INPUT PREV / CLEAN Output
All signals, programs, previews, clean output, and DVE KEY signals assigned to bus buttons
can be freely assigned to AUX1 to AUX4. The signals are assigned as shown below. (AUX2
to AUX4 are optional.) The IN01-16, UTILITY IN, and STILL1-4 signal can be assigned to the
INPUT PREV connector.
Select the button in the Bus Select section where the output setting will be made.
Select the output signal in the KEY/AUX bus section.
The signals assigned to the bus buttons are shown below.
Selected buttons
Signal
1-16
Signals assigned in the bus assignments (Same as PGM/PST bus)
PGM Program
output
PREV
Preview output (Next output with KEY)
CLEAN
M/E clean output appears at connector (with or without keys).
See section 6-1-2 “Selecting AUX / INPUT PREV / CLEAN Output.”
DVE KEY
Signal assigned to DVE KEY button. See next page.
See section 6-1-2 “Selecting AUX / INPUT PREV / CLEAN Output.”
UTILITY IN
Signals input to UTL IN connector on MU rear panel.
See section 6-1-2 “Selecting AUX / INPUT PREV / CLEAN Output.”
*In INPUT PREV output, only buttons assigned to 1-16, UTL-IN, and STILL1-4 can be selected. DVE
button cannot be selected, because a signal is not assigned to the button.
IMPORTANT
When the optional HVS-AUX16 is used, the AUX and INPUT PREV output can be
controlled externally. To control the INPTU PREV output, specify AUX5 from the
HVS-AUX16.
BLACK
1
2
3
4
5
6
7
8
MATT
SHIFT
DVE
BUS
SELECT
KEY/
AUX
KEY1
KEY2
DSK
EFFECT BK
AUX1
AUX2
AUX3
AUX4
INPUT PREV
PGM
PREV
CLEAN DVE KEY
UTILITY IN
DVE KEY
Select the output target
Select the output signal