Operating Manual BKS309.MS
14.08.2018
34
Device Mode [DevicMod]
Purpose:
This parameter determines whether the web controller controls a
standard steering frame or a Chase & Follow application
.
The user can choose between the two settings.
Setting:
[Chas&Fol]
Purpose:
Control of a Chase & Follow application (default setting)
Setting:
[Standard]
Purpose:
Control of a standard FMS steering frame
.
Master Sensor Input [Mastrinp]
Purpose:
This parameter determines in a Chase & Follow application the
sensor input connector for the master web.
The user can choose between two settings.
Setting:
[right]
Purpose:
The right sensor input is used for the master web (default setting).
Setting:
[left]
Purpose:
The left sensor input is used for the master web.
Home Position [Home Pos]
Purpose:
This parameter determines the position of the actuator spindle in
its retracted position. In Automatic Mode the actuator stops at this
position and moves no further backwards. In Manual Operation
this parameter has no meaning.
Range:
0.0 to
300.0
Default: 0.0
Increment:
0.1
Unit:
[mm]
Condition:
This parameter appears on the display only if an actuator /
winderGLIDE is connected to the controller.
