manualshive.com logo in svg

FMC Technologies Proline Promass 83 E, Description Of Device Functions

The FMC Technologies Proline Promass 83 E is a cutting-edge device offering highly precise measurements for various industrial processes. With its exceptional accuracy and reliability, this device ensures optimal efficiency. To learn more about its capabilities and access the user manual, simply visit manualshive.com to download the manual for free.

Share
Download
background image

Issue/Rev. 0.2 (12/12)

MN0M023 • Page 205

Device Functions Proline Promass 83

Index key words

Tube damping fluct. (Advanced diagnosis)

Deviation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  177
History  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  177
Maximum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  177
Minimum  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  177
Tube damping fluct.. . . . . . . . . . . . . . . . . . . . . . . . . .  177
Warning level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  178

Tube damping (Advanced diagnosis)

Deviation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  172
History  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  172
Maximum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  172
Minimum  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  172
Tube damping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  172
Warning level  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  172

Type

Input/Output 1...4  . . . . . . . . . . . . . . . . . . . . . . . . . .  188
I/O Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  187
Sub-input/Sub-output 1...4 . . . . . . . . . . . . . . . . . . . .  188

U

Unit

Corrected volume  . . . . . . . . . . . . . . . . . . . . . . . . . . . .  19
Corrected volume flow  . . . . . . . . . . . . . . . . . . . . . . . .  19
Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  20
Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  21
Mass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  17
Mass flow  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  17
Pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  21
Reference density. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  20
Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  21
Totalizer  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  58
Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  18
Volume flow  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  18

Unlocking/Locking (user interface) . . . . . . . . . . . . . . . . . .  38

V

Value F High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  77

Value F Low . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  77

Value simulation

Current (current input)  . . . . . . . . . . . . . . . . . . . . . . .  117
Current (current output)  . . . . . . . . . . . . . . . . . . . . . . .  72
Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  97
Measured variable . . . . . . . . . . . . . . . . . . . . . . . . . . .  184
Status input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  113
Switch point (pulse/freq. output) . . . . . . . . . . . . . . . . .  99
Switch point (Relay output) . . . . . . . . . . . . . . . . . . . .  106

Value Simulation Pulse  . . . . . . . . . . . . . . . . . . . . . . . . . . .  98

Value 0_4 mA

Current input. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  115
Current output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Value 20 mA

Current input. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  116
Current output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Valve parameter

Batching function . . . . . . . . . . . . . . . . . . . . . . . . . . . .  153

Valve 1 Closing time . . . . . . . . . . . . . . . . . . . . . . . . . . . .  164

Valve 1 Internal switch point . . . . . . . . . . . . . . . . . . . . . .  164

Version Info

Amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  186
F-CHIP  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  187
Input/Output 1...4. . . . . . . . . . . . . . . . . . . . . . . . . . .  188
I/O Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  187
Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  185

Volume flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12

W

Warning mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  166

Write protection  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  120

Z

Zero point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  135

Zero Point adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  129

Symbols

% Black liquor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  15

% Carrier Mass flow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14

% Carrier Volume flow  . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

% Target Mass flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13

% Target Volume flow . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13

°Api  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  15

°Balling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  16

°Baume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  15

°Brix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  16

°Plato  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  16

Numerics

100% Value

Additional line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Additional line (Multiplex) . . . . . . . . . . . . . . . . . . . . . .  48
Information line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  51
Information line (Multiplex) . . . . . . . . . . . . . . . . . . . . .  54
Main line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  41
Main line (Multiplex) . . . . . . . . . . . . . . . . . . . . . . . . . .  43

Summary of Contents for Proline Promass 83 E















































































































































































































Reviews:

No comments

Related manuals for Proline Promass 83 E

A&D SV-1A Instruction Manual preview
SV-1A
Brand: A&D Pages: 102
Tactical Controls DTM Instruction Manual preview
DTM
Brand: Tactical Controls Pages: 11
FarmChem GRIZZLY Operation Manual preview
GRIZZLY
Brand: FarmChem Pages: 8
Facom 701A Instruction Manual preview
701A
Brand: Facom Pages: 42
QUBINO Smart meter Manual preview
Smart meter
Brand: QUBINO Pages: 2
JENCO EC3840 Operation Manual preview
EC3840
Brand: JENCO Pages: 13
bmcm meM-INC Quick Start Manual preview
meM-INC
Brand: bmcm Pages: 5
Tektronix TAS 200 Instruction Manual preview
TAS 200
Brand: Tektronix Pages: 48
THORLABS PM10-10 Operation Manual preview
PM10-10
Brand: THORLABS Pages: 21
Magnescale SR77 Supplement Manual preview
SR77
Brand: Magnescale Pages: 36
HANLA HGS-100 Technical Manual preview
HGS-100
Brand: HANLA Pages: 12
Major tech MT 770 Instruction Manual preview
MT 770
Brand: Major tech Pages: 16
Hanna Instruments HI 88703 Instruction Manual preview
HI 88703
Brand: Hanna Instruments Pages: 32
Fresh Roast Systems ColorTrack Genesis User Reference Manual preview
ColorTrack Genesis
Brand: Fresh Roast Systems Pages: 9
BK Precision 2831C Lnstruction Manual preview
2831C
Brand: BK Precision Pages: 21
South GALAXY G7 User Manual preview
GALAXY G7
Brand: South Pages: 54
NI PXIe-4141 Calibration Procedure preview
PXIe-4141
Brand: NI Pages: 20
Hanna Instruments HI96702C Instruction Manual preview
HI96702C
Brand: Hanna Instruments Pages: 28

Brands by name

Popular brands

Load more brands